FiberLaserLab

What Is a Galvo Laser? Galvo vs Gantry Machines Explained

By FiberLaserLab Editorial Team. Updated November 18, 2026.

Quick answer

A galvo laser uses two small mirrors, moved by galvanometer motors, to steer the laser beam across the work area while the laser itself stays still. This makes galvo machines many times faster than gantry lasers, which move the whole laser head on rails. The trade-off is a smaller, fixed work area set by the lens.

If you've watched a fiber laser engrave a logo in two seconds, you've seen a galvo system at work. It's one of the main reasons fiber lasers feel so different from the diode and CO2 machines most hobbyists start with.

How a galvo system works

Inside the galvo head are two lightweight mirrors. Each one sits on a galvanometer, a precise motor that can rotate the mirror by tiny angles very quickly.

  • One mirror moves the beam along the X axis.
  • The other moves it along the Y axis.
  • The beam then passes through a special flat-field lens (often called an F-theta lens) that keeps it focused across the whole marking area.

Because only the mirrors move, and they weigh almost nothing, the beam can sweep across the surface at speeds no gantry can match.

Galvo vs gantry at a glance

GalvoGantry
How the beam movesMirrors steer the beamLaser head moves on rails
Typical speedVery fast (thousands of mm/s)Slower (limited by the moving head)
Work areaSmall, set by the lensLarge, set by the frame
Common laser typesFiber, UV, some CO2Diode, CO2
Best forSmall items, metal, batchesLarge signs, sheets, cutting

For the full buying comparison, see galvo vs gantry laser engravers.

Galvo vs gantry laser engravers Galvo Mirrors steer the beam Very fast, thousands of mm/s Small area, set by the lens Fiber, UV and some CO2 Best for small items, metal, and batches Gantry Laser head moves on rails Slower, the head has to move Large area, set by the frame Diode and CO2 Best for large signs, sheets, and cutting
Galvo machines steer the beam with mirrors, while gantry machines move the whole laser head.

Why galvo and fiber go together

Fiber lasers are mostly used for small, detailed marks on metal: rings, tags, tools, tumblers and parts. Those jobs reward speed and precision, not a huge bed. Galvo heads give exactly that, which is why nearly every desktop fiber laser is a galvo machine.

The work area depends on the lens

On a galvo, the lens decides how large an area you can mark without moving the item. Common sizes are roughly 110 x 110 mm, 150 x 150 mm, 200 x 200 mm and 300 x 300 mm.

There's a trade-off:

  • Smaller lenses concentrate the energy into a smaller spot, giving finer detail and more power density.
  • Larger lenses cover more area but spread the beam over a larger spot, so marks can be less intense.

Many people start with a 110 or 150 mm lens and buy a second lens later for larger items. Our guide on fiber laser lens sizes goes into the details.

What galvo lasers are great at

  • Speed: marking logos and text in seconds, which matters for batch production
  • Fine detail: small text, serial numbers and QR codes
  • Jewelry and small items: rings, pendants, dog tags and keychains
  • Cylinders with a rotary: tumblers, pens and rings (see how rotary attachments work)

Where galvo lasers fall short

  • Large flat items: you're limited to the lens area. Larger designs need stitching or a different machine.
  • Cutting sheets: a gantry CO2 laser is the standard tool for cutting wood and acrylic.
  • Very tall or uneven items: focus changes with height, so curved items may need a rotary or careful setup.

Is a galvo laser hard to use?

Not really, but focusing and framing work a little differently. Instead of moving a laser head to a start position, you raise or lower the galvo head to the correct focal height, and a red preview light shows you the outline of your design. Our guide to laser engraving for beginners covers the first-day workflow.

If you're shopping for one now, read our buying checklist and our shortlist of the best fiber laser engravers for metal.

Typical galvo speeds and what they mean in practice

Galvo fiber lasers often list maximum marking speeds in the thousands of millimeters per second. Real jobs run slower than the maximum, because settings for good marks are rarely at full speed. Even so, a name on a tag or a small logo usually takes seconds, and batches of identical items move quickly because there's no head to travel across a bed.

Galvo maintenance

Galvo heads have few moving parts, so maintenance is simple: keep the lens and protective window clean, keep dust away from the head, and avoid knocking the column. If marks become distorted or the wrong size, the field calibration may need adjusting in the software.

Galvo or gantry: a quick rule

If the items you'll engrave fit in your hand and are mostly metal, a galvo fiber laser is usually the right choice. If they're bigger than a sheet of paper or mostly wood and acrylic you want to cut, a gantry machine fits better.

Frequently asked questions

What does galvo mean in a laser engraver?

Galvo is short for galvanometer, the fast motor that rotates the mirrors that steer the laser beam.

Are all fiber lasers galvo?

Almost all desktop fiber marking lasers are galvo. Large fiber cutting machines use gantries instead.

Why is my galvo work area so small?

The lens sets the work area. Larger lenses cover more area but give a larger spot and less power density.

Can a galvo laser cut?

Galvo lasers are built for marking and engraving. Higher-power fiber galvos can cut very thin metal slowly, but they aren't cutting machines.

FiberLaserLab Editorial Team
We research fiber, CO2 and diode lasers so you can choose and use the right machine with confidence. How we work.