FiberLaserLab

How to Use a Rotary Attachment on a Laser Engraver

By FiberLaserLab Editorial Team. Updated November 20, 2026.

Quick answer

A laser engraver rotary turns round items like tumblers, rings and pens under the beam so the design stays in focus around the curve. Roller rotaries rest items on wheels and suit tumblers and bottles; chuck rotaries grip items with jaws and suit rings, tapered cups and small parts. Set it up by leveling the item, entering its diameter and enabling rotary mode in your software.

A laser engraver rotary is the accessory that turns a flat-bed laser into a tumbler, ring, pen and bottle engraver. Without one, a laser can only mark a narrow strip at the top of a curved item before the surface curves out of focus.

This guide explains how rotaries work, roller vs chuck types, what each can hold, setup steps, and how to fix common problems.

How a rotary works

On a galvo fiber laser

The rotary turns the item while the laser marks a narrow strip of the design at the top of the curve. The software splits the design into strips and rotates the item between them. The result is a continuous design around the item.

On a gantry diode or CO2 laser

The rotary replaces the Y-axis movement: instead of the head moving forward and back, the item rotates. The laser moves along X while the rotary turns the item.

Either way, the top line of the item must stay level and in focus.

Roller vs chuck rotaries

Roller rotaryChuck rotary
How it holds the itemItem rests on rotating wheelsJaws grip the item, inside or outside
Best forStraight tumblers, bottles, cans, glassesRings, tapered tumblers, cups with handles, small parts
Setup speedFast: just place the itemSlower: clamp and center
Slipping riskHigher on light or tapered itemsLow
Small itemsNot greatExcellent, especially with ring jaws

Many engravers end up with both: a roller for fast batches of straight tumblers, and a chuck for rings and awkward shapes.

Roller rotary vs chuck rotary Roller Item rests on rotating wheels Best for straight tumblers, bottles, cans and glasses Fast setup: just place it Higher slipping risk on light or tapered items Not great for small items Chuck Jaws grip the item Best for rings, tapered tumblers, cups with handles, and small parts Slower setup: clamp, center Low slipping risk Excellent for small items
Roller rotaries are quick for straight items, while chuck rotaries grip small and tapered ones.

What size do you need?

Check the rotary's minimum and maximum diameters before buying. Typical needs:

  • Rings: chuck rotary with small jaws or ring adapters
  • Pens and small cylinders: chuck rotary
  • Standard tumblers and bottles: roller or chuck with large jaws
  • Large mugs with handles: chuck rotary that grips the inside or rim

Also check that the rotary fits under your laser's head and that the head can reach focus with the item mounted. On galvo machines, rotaries usually sit on the base below the lens. See fiber laser lens sizes for how lens choice affects focus height.

Setting up a rotary

  1. Connect the rotary to the machine's rotary or axis port, with power off.
  2. Enable rotary mode in your software (EZCAD, LightBurn or the manufacturer's app).
  3. Mount the item and level the surface you'll engrave. Tapered items need the narrow end raised or an angled chuck.
  4. Measure the diameter at the engraving point and enter it.
  5. Focus on the top of the item.
  6. Frame the design with the red light or software preview.
  7. Run a test on a scrap item before the real one.

Software-specific steps are in our EZCAD guide and LightBurn galvo guide.

Rotary engraving projects

Common rotary problems

ProblemLikely causeFix
Design stretched or squashedWrong diameter or steps-per-rotation settingRe-measure and check rotary settings
Design fades at one endItem not level or taperedLevel the top line, raise the narrow end
Seam doesn't line upSlipping or wrong circumferenceUse a chuck or improve grip
Wobbly linesItem not centeredRe-mount centered in the chuck
Rotary doesn't moveNot enabled, or wrong portEnable rotary mode, check connection

Rotary vs flat engraving with a large lens

Some people try to engrave tumblers with a large lens instead of a rotary. It only works for small designs at the top of the curve. For wraps and anything wider than a narrow band, a rotary is far better.

Safety

Make sure items are secure before marking. A slipping item can move into the beam path unexpectedly. Wear safety glasses rated for your laser's wavelength, and never reach into the work area while the rotary is turning.

When choosing one, see our picks for the best rotary for fiber lasers.

Frequently asked questions

What does a rotary do on a laser engraver?

It rotates round items under the beam so the design stays in focus around the curve, allowing full wraps on tumblers, rings and pens.

Do I need a rotary for tumblers?

For anything more than a small logo at the top, yes. A rotary keeps the design in focus around the cup.

What is the difference between a roller and chuck rotary?

Roller rotaries rest items on wheels and suit straight tumblers and bottles. Chuck rotaries grip items with jaws and suit rings, tapered cups and small parts.

Can you use a rotary on a fiber laser?

Yes. Galvo fiber lasers support rotaries through EZCAD, LightBurn or manufacturer software.

Why is my rotary engraving stretched?

Usually the diameter or rotary steps setting is wrong. Re-measure the item and check your rotary settings.

FiberLaserLab Editorial Team
We research fiber, CO2 and diode lasers so you can choose and use the right machine with confidence. How we work.