FiberLaserLab

How to Use a Laser Engraver: Your First Project Step by Step

By FiberLaserLab Editorial Team. Updated November 12, 2026.

Quick answer

To use a laser engraver, set it up in a ventilated space, put on wavelength-rated safety glasses, load your design into the software, focus the laser on the material, and run a small test grid to find power and speed. Then frame the design with the preview light, run the job, inspect the result and save the settings that worked.

This guide shows you how to use a laser engraver from an unopened box to a finished first piece. It's written around a desktop galvo fiber laser engraving a stainless steel keychain or tag, because that's a cheap, forgiving first project. The same workflow applies to diode and CO2 machines, with differences noted along the way.

You'll learn the order of operations that experienced engravers follow every time: prepare, focus, test, frame, run, inspect, save. Once that loop is a habit, every new material is just another test grid.

Before you start: what you need on the bench

Gather these before you power anything on:

  • The laser, assembled and placed on a stable, non-flammable surface
  • Safety glasses rated for your laser's wavelength. For a fiber laser that means 1064 nm protection with a suitable OD rating. Our guide to fiber laser safety glasses explains what to buy.
  • Ventilation or a fume extractor running whenever the laser fires
  • A computer with the machine's software installed (usually EZCAD or LightBurn for fiber lasers)
  • Scrap material that matches what you plan to engrave
  • Isopropyl alcohol and a lint-free cloth
  • A fire extinguisher within reach, especially for wood or leather

If you haven't set up your space yet, read how to set up a laser engraving workspace first. And if you're still choosing a machine, laser engraving for beginners covers which laser type fits which materials.

Step 1: Connect and test the machine

Connect the laser to the computer (usually USB) and to power, then start the software. Most fiber lasers ship with EZCAD, and many also work with LightBurn's galvo version. Check that the software detects the machine before you go further.

Turn on the red preview light. It's a low-power visible pointer that shows where the invisible laser will fire. If you see it on your work surface, the connection works.

Step 2: Prepare a simple design

For a first job, keep it simple: a word or short name in a bold font, around 20 to 40 mm wide. Avoid thin script fonts and tiny text until you know your settings.

In the software you'll choose how the design is marked:

  • Fill (hatch): the laser fills the inside of letters with closely spaced lines. This is what you want for solid text and logos.
  • Outline: the laser traces only the edges. Useful for line art and fine detail.

The difference between these modes, and between image and line files, is covered in raster vs vector engraving.

Step 3: Clean and place the material

Wipe the surface with isopropyl alcohol to remove oil and fingerprints. Place the piece flat in the middle of the work area. On a galvo laser the center of the lens field gives the most even results, so keep small pieces near the center.

Use a jig, tape or a simple corner stop if you plan to engrave several identical items. Repeatable placement saves a lot of time later.

Step 4: Focus the laser

Focus matters more than any other setting. An out-of-focus beam spreads its energy and makes even a strong laser look weak.

On a galvo fiber laser you raise or lower the laser head until the lens sits at its focal distance from the material surface. Most machines give you one of these methods:

  • A focus gauge or ruler cut to the correct distance
  • Two red dots that merge into one when the height is right
  • Autofocus on some newer models

On a gantry diode or CO2 laser, you set the distance between the laser head and material with a gauge block or autofocus probe.

Our full guide on how to focus a fiber laser explains fine focus tests if your marks look soft.

Step 5: Run a test grid

Never guess settings on a real item. Instead, engrave a grid of small squares on scrap, with each square at a different power and speed. Most software can generate this automatically (sometimes called a material test or parameter array).

A test grid shows you, in one run, which combination gives the color, contrast and depth you want. Here are starting points for a first test on a typical 20W to 30W Q-switched fiber laser. Always test before using them on real work.

MaterialPowerSpeedFrequencyTypical result
Stainless steel, white mark60 to 80%1,000 to 2,000 mm/s30 to 40 kHzLight frosted mark
Anodized aluminum30 to 60%1,500 to 3,000 mm/s30 to 60 kHzBright white mark
Brass70 to 90%800 to 1,500 mm/s30 to 40 kHzLight gold to dark mark

For more materials, see our fiber laser settings chart.

Step 5: Run a test grid Material Power Speed Frequency Typical result Stainless steel, white mark 60 to 80% 1,000 to 2,000 mm/s 30 to 40 kHz Light frosted mark Anodized aluminum 30 to 60% 1,500 to 3,000 mm/s 30 to 60 kHz Bright white mark Brass 70 to 90% 800 to 1,500 mm/s 30 to 40 kHz Light gold to dark mark
A visual recap of the section "Step 5: Run a test grid" above.

Step 6: Frame the job

Before firing, use the preview (framing) function. On a galvo laser, the red light traces the outline of your design on the material, so you can nudge the piece until it's exactly where you want it. On a gantry laser, the head moves around the design's boundary.

Check that the outline sits fully on the material and away from edges, holes or seams.

Step 7: Run the job safely

Put on your safety glasses, close the enclosure if you have one, and make sure ventilation is running. Then start the job.

While it runs:

  • Stay with the machine. Never leave a running laser unattended.
  • Don't reach into the work area or look at the mark through anything but rated glasses or a rated enclosure window.
  • Watch for flames or smoke that look abnormal, especially on organic materials.

Fiber lasers are Class 4 lasers and their beam is invisible. Reflections off shiny metal can be as dangerous as the direct beam. The laser engraver safety guide covers the full list of precautions.

Step 8: Inspect, adjust and save

Once the job finishes, wait a few seconds for the part to cool (metal can get hot), then check it under good light:

  • Too faint? Increase power, slow down, or add a pass. Check focus first.
  • Discolored or burned around the edges? Reduce power or increase speed.
  • Visible lines in the fill? Tighten the hatch spacing.
  • Uneven across the design? The piece may not be flat, or it may sit near the edge of the lens field.

When you get a result you like, save the settings as a named preset or material library entry, with the material, lens and laser power in the name. This is how experienced engravers build up speed: they rarely start from zero.

Your next three projects

After a simple tag, these build your skills in a sensible order:

  1. A full stainless steel project with white, dark and deep marks. Follow how to laser engrave stainless steel.
  2. Anodized aluminum, which is forgiving and high contrast. See how to laser engrave aluminum.
  3. A cylindrical item such as a tumbler or pen with a rotary attachment. Read our rotary attachment guide first.

If you're still deciding which machine to buy, our shortlist of the best laser engravers for beginners focuses on machines that are easy to learn.

Frequently asked questions

How do you use a laser engraver for the first time?

Set it up in a ventilated space, wear wavelength-rated glasses, load a simple design, focus on the material and run a test grid on scrap. Use the best square's settings for your real piece.

Is a laser engraver easy to use?

Yes, once you understand focus and test grids. Most people make clean, repeatable marks within the first few sessions.

What software do I need to use a laser engraver?

Most fiber lasers ship with EZCAD, and many also support LightBurn. Diode and CO2 machines commonly use LightBurn or the manufacturer's own app.

Why is my laser engraver not marking?

The most common causes are poor focus, settings too fast or too weak for the material, or the wrong laser type for the material. Check focus first, then run a test grid.

Do I need to wear glasses if my laser has an enclosure?

If the enclosure is fully closed and its window is rated for your laser's wavelength, it protects you during the job. Wear glasses whenever the enclosure is open or the machine has none.

FiberLaserLab Editorial Team
We research fiber, CO2 and diode lasers so you can choose and use the right machine with confidence. How we work.