FiberLaserLab

Raster vs Vector Engraving: When to Use Each

By FiberLaserLab Editorial Team. Updated November 12, 2026.

Quick answer

Raster engraving builds an image line by line, like a printer, and is used for filled areas and photos. Vector engraving follows the lines of a shape, and is used for outlines, fine line art and cutting. Use raster or hatch fill for solid text, logos and photos, and vector for thin lines, borders and cuts.

Raster vs vector engraving is one of the first choices you make in laser software, and it decides how fast a job runs and how it looks. Pick the wrong mode and you get hollow letters, jagged edges or a job that takes ten times longer than it should.

This guide explains both modes in plain terms, how they work differently on gantry (diode and CO2) and galvo (fiber) machines, and which one to choose for common jobs.

What is raster engraving?

Raster engraving works like an inkjet printer. The laser scans back and forth in rows, switching on and off (or changing power) to build the design line by line.

  • Good for: filled text, solid logos, photos, shading and textures
  • Speed: depends on the area. A large fill takes longer than a small one, even if the design is simple.
  • Files: any design can be rastered. Images (JPG, PNG, BMP) can only be rastered.

On a gantry laser, raster jobs are slower because the head must physically sweep across every row. On a galvo laser, mirrors do the sweeping, so even large fills run quickly.

What is vector engraving?

Vector engraving follows the paths in a design, like a pen tracing an outline. The laser only travels where there are lines.

  • Good for: outlines, thin line art, borders, scoring and cutting
  • Speed: depends on the total path length, not the area
  • Files: needs vector files (SVG, DXF, AI, EPS, PDF with vector paths)

On CO2 and diode lasers, vector mode with high power and slow speed is how you cut material. On a fiber laser, vector paths are used for fine outlines and for the slow passes involved in cutting very thin sheet.

Raster vs vector at a glance

RasterVector
How the laser movesRow by row across the whole areaAlong the lines of the design
Best forFills, photos, shadingOutlines, fine lines, cutting
File typesImages and vector filesVector files only
Speed depends onArea of the designLength of the lines
Edge qualityCan look slightly stepped at low resolutionSmooth, follows the curve exactly
Typical settingLine interval or DPISpeed, power, passes
Raster vs vector engraving Raster Moves row by row Best for fills and photos Speed depends on the area Accepts images and vector files Vector Follows the lines of the design Best for outlines and cutting Speed depends on line length Needs vector files
Raster fills an area row by row, while vector follows the lines of the design.

How it works on a galvo fiber laser

Galvo fiber lasers use slightly different terms, which confuses many people moving from diode or CO2 machines.

In EZCAD and LightBurn's galvo mode, you usually choose:

  • Hatch (fill): the software fills a closed vector shape with parallel lines at a set spacing. It behaves like raster engraving, but each line follows the shape's boundaries. This is the standard way to fill text and logos on metal.
  • Outline (contour): the laser traces the vector path only. This is vector engraving.
  • Bitmap (image) mode: the software converts a photo or image into dots or lines, usually with dithering. This is true raster engraving, used for photos and shading.

Hatch settings have a big effect on quality: line spacing, angle, cross-hatching and border offset. Our hatch settings guide covers each. If you're new to galvo machines, start with how galvo lasers work.

When to use each

JobBest modeWhy
Solid text and logos on metalHatch fill (raster-style)Clean, even fill
Small or thin textOutline or fine hatchHatch can fill in tiny gaps
Line drawings and bordersVector outlineSharp, fast
Photos and portraitsRaster/bitmap with ditheringOnly raster can show shading
Cutting wood or acrylic (CO2)Vector, high power, slowLaser follows the cut line
Deep engraving on metalHatch fill, many passes, rotating angleEven depth, no ridges
Serial numbers and QR codesHatch fill or single-line fontsReadable, quick

Often the best result combines both: hatch fill for the body of the letters plus a vector outline pass to sharpen the edges. Many engravers use this for logos on stainless steel and anodized aluminum.

File types: which to use

  • For vector work: SVG, DXF, AI, EPS or PDF with real vector paths. Fonts should be converted to curves (outlines) if you share files between programs.
  • For raster work: high-resolution PNG, JPG or BMP. Higher resolution gives better detail, up to the limit of your laser's spot size.
  • For both: a vector file can be filled (raster or hatch) or outlined. An image can only be rastered unless you trace it into vectors first.

A common trap: a logo saved as a JPG looks fine on screen but gives fuzzy edges when engraved. Ask clients for SVG, AI or PDF versions, or trace the image in your design software. Our guide to laser engraving file formats goes into more detail.

Common problems and fixes

ProblemLikely causeFix
Letters engrave as outlines onlyShape not closed, or no fill setClose paths and apply hatch or raster fill
Jagged curved edgesLow-resolution imageUse a vector file or higher resolution
Visible lines in a fillLine interval or hatch spacing too wideTighten spacing
Fill looks overburnedSpacing too tight for the powerIncrease spacing or reduce power
Photo looks muddyNo dithering, poor contrastAdjust contrast and use a dithering mode
Job takes far too longLarge raster area on a gantryUse outline where possible, or reduce the area

Photos are a special case

Photo engraving is always raster. The software converts gray tones into patterns of dots (dithering) or varying power. Results depend heavily on the material: anodized aluminum, coated metal, slate and light woods tend to work well. Read our guides on laser engraving photos and engraving photos on wood for image prep.

Which software handles this best?

EZCAD is the standard software bundled with many fiber lasers, and it handles hatch, outline and bitmap modes. LightBurn's galvo version offers a more modern interface with similar controls. Our EZCAD beginner's guide and LightBurn for galvo lasers walk through both, and LightBurn vs EZCAD compares them directly.

If you're running your very first job, follow our step-by-step guide on how to use a laser engraver.

Frequently asked questions

What is the difference between raster and vector engraving?

Raster engraving scans in rows to fill an area, like a printer. Vector engraving traces the lines of a shape. Raster is for fills and photos; vector is for outlines and cutting.

Is raster or vector better for laser engraving?

Neither is better overall. Use raster or hatch fill for solid designs and photos, and vector for thin lines, borders and cuts. Many jobs use both.

Can you laser engrave a JPG?

Yes, as a raster engraving. For crisp logos and text, a vector file like SVG or DXF usually gives cleaner edges.

Is vector engraving faster than raster?

Usually, because the laser only travels along the lines. A large filled area takes longer in raster mode, especially on a gantry laser.

What is hatch fill on a fiber laser?

Hatch fill fills a closed vector shape with parallel lines at a set spacing. It's how galvo fiber lasers engrave solid text and logos on metal.

FiberLaserLab Editorial Team
We research fiber, CO2 and diode lasers so you can choose and use the right machine with confidence. How we work.