Laser Engraving Metal Business Cards
Quick answer
Metal business card engraving is usually done on thin anodized aluminum or stainless steel cards with a fiber laser. Anodized aluminum gives bright white marks quickly; stainless steel gives white or black marks. Design with bold text and clean logos, use a jig for batches, and test settings on a spare card before running a full order.
Metal business card engraving is a premium product that's simple to make. Anodized aluminum or stainless steel cards cost little as blanks, engrave in seconds with a fiber laser, and sell well to professionals, realtors, tradespeople and brands who want to stand out.
This guide covers card materials, which lasers work, design rules, settings, batch production and pricing basics.
Card materials
| Material | Look | Laser result | Notes |
|---|---|---|---|
| Anodized aluminum | Black, silver, gold, colors | Bright white or silver marks | Most popular; light and affordable |
| Stainless steel | Silver, black or gold coated | White or black marks | Heavier, premium feel |
| Brass | Gold tone | Dark or light marks | Tarnishes unless coated |
| Coated steel | Black, gold, rose gold | Removes coating for contrast | Test coating behavior |
Most business card blanks are around 0.2 to 0.8 mm thick. Thicker cards feel more premium; thin cards can warp if overheated.
Which laser works?
- Fiber laser: best for all card types, including bare stainless. Fast and precise.
- Diode laser: works on anodized aluminum and coated cards, slower. Not bare stainless.
- CO2 laser: works on anodized aluminum; needs spray for bare metal.
If you're comparing options, see can a diode laser engrave metal.
Design rules for metal cards
- Keep text large enough. Small contact details should still be readable; test your minimum size on a spare card.
- Use bold, clean fonts. Very thin fonts lose detail.
- Convert text to curves before sending files between programs.
- Use vector logos (SVG, AI, PDF) for crisp edges. See raster vs vector engraving.
- Leave margins of a few millimeters from the card edge.
- QR codes work well on metal cards. Test that they scan before running a batch.
Starting settings
These are starting points for a 20W to 30W fiber laser. Test on a spare card first.
| Card | Finish | Power | Speed | Frequency | Hatch spacing |
|---|---|---|---|---|---|
| Anodized aluminum | White | 30 to 60% | 1,500 to 3,000 mm/s | 30 to 60 kHz | 0.03 to 0.05 mm |
| Stainless steel | White | 60 to 80% | 1,000 to 2,000 mm/s | 30 to 40 kHz | 0.03 mm |
| Stainless steel | Black | 30 to 60% | 100 to 300 mm/s | High end of range | 0.01 to 0.02 mm |
| Coated steel | Coating removal | 40 to 70% | 1,000 to 2,000 mm/s | 30 to 40 kHz | 0.03 mm |
See how to laser engrave aluminum and how to laser engrave stainless steel for more detail.
Engraving both sides
Many metal cards have a logo on one side and contact details on the other. Use a jig that holds the card in the same position when flipped, and mark a reference corner so both sides line up.
Batch production
- Use a jig that holds several cards in fixed positions.
- Work within the lens field. A standard 110 x 110 mm lens fits one or two cards at a time; larger lenses fit more, with less power density. See fiber laser lens sizes.
- Check the first card carefully before running the batch.
- Wipe cards with alcohol before and after engraving.
Avoiding warping and marks
- Use moderate settings on thin cards to avoid heat distortion.
- Leave protective film off unless you've tested with it.
- Handle with gloves to avoid fingerprints on finished cards.
Finishing and packaging
Presentation is part of what customers pay for. Wipe each card with alcohol after engraving to remove residue and fingerprints, inspect it under good light, and pack cards with a sheet of tissue or a sleeve between them so engraved faces don't scratch each other. A simple branded box turns a set of cards into something that feels like a premium order.
Pricing metal business cards
Pricing depends on card material, quantity, sides engraved and design work. Many sellers price per card with lower unit prices for larger orders and a setup fee for new designs. Our guide to how much to charge for laser engraving covers pricing methods.
Safety
Shiny cards reflect the invisible fiber beam. Wear 1064 nm glasses rated for your laser, and extract fumes from coatings and anodizing dyes. See the laser engraver safety guide.
Planning to make these regularly? The best small laser engraver for metal and best laser engraver for small business guides compare suitable machines.
Frequently asked questions
What laser do you need to engrave metal business cards?
A fiber laser handles every card type. A diode laser works on anodized aluminum and coated cards, but not bare stainless steel.
What are metal business cards made of?
Most are anodized aluminum or stainless steel, with some brass and coated steel cards.
How long does it take to engrave a metal business card?
With a fiber laser, typically seconds to a minute per side, depending on the design and finish.
Can you put a QR code on a metal business card?
Yes. Fiber lasers mark QR codes clearly on aluminum and stainless steel. Test that the code scans before engraving a batch.
Are metal business cards worth selling?
They can be. Blanks are inexpensive, engraving is fast, and customers see them as premium, which supports good margins.