Laser Engraving Dog Tags and Pet ID Tags
Quick answer
Laser engraving dog tags works best with a fiber laser, which marks stainless steel, aluminum and brass tags quickly and permanently. Clean the tags, hold them in a jig, focus and run a test. Anodized aluminum gives bright white marks; stainless steel gives white, black or deep marks. Deep or annealed marks last longest on tags that rub against collars.
Laser engraving dog tags is one of the easiest and most profitable jobs for a fiber laser. Tags are cheap, small, quick to engrave and always in demand, whether for pet IDs, military-style tags, memorials or keychains.
This guide covers which laser and materials work best, starting settings, batch jigs, design tips and how to make tags last.
Which laser is best for dog tags?
| Laser | Anodized aluminum | Stainless steel | Brass |
|---|---|---|---|
| Fiber | Excellent white marks | White, black or deep | Very good |
| Diode | Good white marks | Poor without spray | Poor |
| CO2 | Good white marks | Needs spray | Needs spray |
A 20W fiber laser engraves a tag in seconds. For high volume, a fiber laser pays off quickly. See can a diode laser engrave metal if you're comparing.
Tag materials
- Anodized aluminum: light, colorful, inexpensive, bright white marks. The anodized layer wears with time on very active pets.
- Stainless steel: durable, corrosion-resistant, the best choice for long life. Supports white, black and deep marks.
- Brass: classic look, engraves well, tarnishes unless sealed. See how to engrave brass.
- Silicone or enamel-filled tags: check the material before engraving.
Starting settings
These are starting points for a 20W to 30W fiber laser. Test on a spare tag first.
| Tag | Finish | Power | Speed | Frequency | Passes |
|---|---|---|---|---|---|
| Anodized aluminum | White | 30 to 60% | 1,500 to 3,000 mm/s | 30 to 60 kHz | 1 |
| Stainless steel | White | 60 to 80% | 1,000 to 2,000 mm/s | 30 to 40 kHz | 1 |
| Stainless steel | Black | 30 to 60% | 100 to 300 mm/s | High end of range | 1 |
| Stainless steel | Deep | 90 to 100% | 500 to 1,000 mm/s | 30 to 40 kHz | 10 to 30 |
| Brass | Dark/engrave | 70 to 90% | 500 to 1,000 mm/s | 30 to 40 kHz | 1 to 5 |
For more detail on each metal, see engraving aluminum and black marking stainless steel.
Batch engraving with a jig
A jig is the biggest time saver for tags:
- Cut or buy a plate with pockets that hold tags in fixed positions.
- Design a template in your software that matches the pocket layout.
- Drop in tags, swap the text per tag, and engrave the whole batch.
With a galvo fiber laser, a 110 or 150 mm lens holds many small tags at once. Our guide to fiber laser lens sizes explains how much area each lens covers.
What to put on a pet ID tag
Keep it simple and readable:
- Pet's name
- Owner's phone number (the most important line)
- A second contact or "microchipped" note
- City or address (optional)
Use bold, clean fonts. Text should be readable at arm's length. Engrave both sides if you need more space.
Tag shapes, sizes and both-side engraving
Bone, round, heart and military-style tags are the most popular shapes. Small tags limit how much text fits, so check the engravable area before promising a customer four lines. As a rough rule, fewer, larger lines read better than many tiny ones.
To engrave both sides, build a jig pocket that holds the tag the same way when flipped, and mark a reference point on the jig. Engrave the front for every tag in the batch, flip them all, then run the back template. Military-style tags with a rolled edge need the jig pocket to support the flat center so the tag doesn't rock.
Making tags last
Pet tags rub against collars, buckles and other tags all day. To make the engraving last:
- Use stainless steel for active dogs.
- Engrave with some depth rather than a surface mark only.
- Black annealed marks are durable on stainless, but deep engraving survives heavy wear better.
- Avoid thin coatings that can wear off.
Selling dog tags
Pet tags are an excellent starter product: cheap blanks, quick engraving, steady demand and easy upsells like custom shapes and both-side engraving. See best-selling laser engraved items and how much to charge for laser engraving.
Safety
Tags are small and shiny, so wear 1064 nm glasses rated for your laser and keep extraction running, especially for coated tags. See the fiber laser safety glasses guide.
Tags are small, so a compact machine can be enough. Our guide to the best small laser engraver for metal compares compact options, and the best fiber laser engraver for metal covers larger ones.
Frequently asked questions
What is the best laser for engraving dog tags?
A fiber laser. It engraves aluminum, stainless steel and brass tags quickly with permanent results.
Can a diode laser engrave dog tags?
Yes, on anodized aluminum or coated tags. It struggles on bare stainless steel without marking spray.
How long does laser engraving on a dog tag last?
Deep or annealed marks on stainless steel last for years. Marks on anodized aluminum can wear faster on active pets.
What should I engrave on a dog tag?
The pet's name and at least one phone number. Add a second contact or medical note if there's space.
How do you engrave many dog tags at once?
Use a jig that holds tags in fixed positions, a matching template in your software, and a galvo fiber laser to engrave the batch in one run.