EZCAD for Beginners: The Fiber Laser Software Explained
Quick answer
EZCAD is the control software that ships with many galvo fiber lasers. To use it, import or create your design, apply a hatch fill for solid areas, set power, speed and frequency in the pen parameters, preview with the red light, then press Mark. Save settings that work as named presets so you can reuse them. EZCAD runs on Windows and is tied to the machine's control board.
This EZCAD tutorial walks beginners through the software that runs most galvo fiber lasers. EZCAD can look dated and confusing at first, but you only need a handful of functions to produce professional results.
You'll learn the layout, how to import files, create text, apply hatch fills, set parameters, preview with the red light, use rotary mode and save presets. It's written for EZCAD2, the version most hobby fiber lasers ship with; EZCAD3 works similarly.
What is EZCAD?
EZCAD is laser marking software from Beijing JCZ, the company that makes the control boards in many fiber, UV and CO2 galvo lasers. The software and board are paired, so the version you use depends on your machine's controller.
Key facts:
- Windows only for EZCAD2 and EZCAD3.
- Tied to the board: you usually run the version supplied with your machine.
- Included free with most fiber lasers.
- LightBurn is the main alternative for many JCZ-based machines. See LightBurn for galvo lasers and LightBurn vs EZCAD.
The EZCAD layout
| Area | What it does |
|---|---|
| Top menu and toolbar | File, edit, draw and modify tools |
| Left toolbar | Draw shapes, text, import images and barcodes |
| Center canvas | Your work area, matching the lens field |
| Object list (left) | Every object in the job, in marking order |
| Object properties (left bottom) | Size, position and text options |
| Pen list and parameters (right) | Power, speed, frequency and passes for each pen |
| Bottom bar | Red light preview, Mark button, part counter |
Each object is assigned a pen, and each pen has its own settings. This lets you mark different parts of a design with different parameters in one job.
Step 1: Set up the field size
Make sure the work area in EZCAD matches your lens (for example 110 x 110 mm). Most machines arrive preconfigured. The setting is in the configuration parameters; don't change other values there unless you know what they do.
Step 2: Import or create a design
- Text: click the text tool, click the canvas and type. Change font and size in the properties panel. TrueType and single-line fonts are available.
- Vector files: use File > Import for DXF, PLT, AI and similar formats.
- Images: import bitmaps (BMP, JPG, PNG) for photo engraving, then adjust them in the bitmap options.
- Barcodes and QR codes: use the barcode tool to create them directly.
Position designs with the X and Y values in the properties panel. The center of the field is 0, 0 on most setups.
Step 3: Apply a hatch fill
Text and closed shapes are outlines by default. To fill them:
- Select the object.
- Click the Hatch button.
- Enable a hatch, set line spacing (start around 0.03 mm) and angle.
- Optionally enable a second hatch at a different angle for a cross-hatch.
- Choose whether to keep the outline.
Our hatch settings guide explains every option, including bidirectional hatching and border offset.
Step 4: Set parameters
Select a pen (or right-click an object and assign one), then set:
- Loop count (passes)
- Speed (mm/s)
- Power (%)
- Frequency (kHz)
- Pulse width (MOPA lasers only)
Starting values are in our fiber laser settings chart. Leave advanced delay settings at their defaults until you need them.
Step 5: Focus and preview
Focus the laser on your material (see how to focus a fiber laser). Then press Red (F1 on many setups) to trace the design's outline with the red preview light. Move the part, or adjust the design position, until it lines up.
Step 6: Mark
Put on your 1064 nm safety glasses, start extraction and press Mark (F2 on many setups). Stay with the machine. Inspect the result and adjust settings if needed.
Rotary mode
For tumblers and rings:
- Connect and enable the rotary axis in EZCAD (the location varies by version; often under extension axis or rotary settings).
- Enter the item's diameter.
- Enable rotary marking for the job so EZCAD splits the design into strips.
See our rotary attachment guide.
Saving settings and jobs
- Save jobs as .ezd files for repeat orders.
- Build a parameter library by naming pens or saving parameter sets for each material (for example "SS white 30W 110mm").
- Keep a log of what worked, including lens and focus.
Useful features once you're comfortable
- Serial numbers with auto-increment for batches
- Array tool for marking several items in a grid
- Mark selected to mark only part of a job
- Continuous mode for repeated marking
- Parameter test grid via array and varying pens
Common beginner problems
| Problem | Likely cause | Fix |
|---|---|---|
| Laser marks only outlines | No hatch applied | Select object and apply hatch |
| "Can't find dongle" or board error | Driver or USB issue | Reinstall drivers, try another USB port |
| Design marks in the wrong spot | Field or position settings | Check field size and X/Y position |
| Design is mirrored or rotated | Configuration settings | Check field correction settings with your seller |
| Very weak marks | Focus or settings | Refocus, check power and speed |
Safety
Always wear safety glasses rated for 1064 nm when marking, and never press Mark with your hands in the work area.
Frequently asked questions
Is EZCAD hard to learn?
The interface looks dated, but beginners only need a few tools: text, import, hatch, pen settings, red light and Mark. Most people are comfortable within a few sessions.
Is EZCAD free?
It's included with most galvo fiber lasers that use JCZ control boards. It's tied to the board, so it isn't sold separately for general use.
Does EZCAD work on Mac?
No. EZCAD2 and EZCAD3 run on Windows. Mac users often use LightBurn, which supports many JCZ galvo boards.
What is the difference between EZCAD2 and EZCAD3?
EZCAD3 works with newer JCZ boards and adds features like improved 3D marking. The version you use depends on your machine's controller.
Can I use LightBurn instead of EZCAD?
Yes, on many JCZ-based fiber lasers, with a LightBurn license that includes galvo support.