LightBurn for Galvo Lasers: Setup and First Job
Quick answer
LightBurn can control many galvo fiber lasers that use JCZ (EZCAD2-compatible) control boards. You need a LightBurn license that includes galvo support, then you add your device, import the machine's lens and correction settings, and set up materials using LightBurn's cut/layer system. It runs on Windows, macOS and Linux and offers a more modern interface than EZCAD.
LightBurn galvo support lets you run many fiber lasers with the same modern software that's popular on diode and CO2 machines. For a lot of owners, it's the biggest quality-of-life upgrade after buying a fiber laser: better design tools, a clearer layout, and it runs on a Mac.
This guide covers which machines LightBurn supports, licensing, setup, the settings that matter on a galvo, rotary use, and when EZCAD is still the better choice.
Does LightBurn work with fiber lasers?
Yes, with many of them. LightBurn supports galvo lasers that use JCZ control boards compatible with EZCAD2, which covers a large share of desktop fiber, UV and galvo CO2 lasers. Some brands use their own controllers and software and may not be compatible.
Before buying a license:
- Check your machine's controller. Your seller or manual should say whether it's an EZCAD2-compatible JCZ board.
- Check LightBurn's compatibility list on the LightBurn website.
- Try the free trial, which lets you test with your machine before paying.
EZCAD3-based boards have different compatibility; check LightBurn's current support before assuming.
Licensing
LightBurn sells galvo support as part of specific license tiers, separate from or in addition to the standard gantry license. Licensing has changed over time, so check LightBurn's site for current options and pricing. A license typically includes a period of updates.
Why owners switch from EZCAD
| LightBurn | EZCAD2 | |
|---|---|---|
| Operating systems | Windows, macOS, Linux | Windows only |
| Interface | Modern, layer-based | Dated, pen-based |
| Design tools | Strong: shapes, text, offsets, booleans, image tools | Basic |
| Material library | Built in | Manual pen presets |
| Image engraving | Good dithering and preview | Functional |
| Cost | Paid license | Included with machine |
| Advanced galvo control | Good and improving | Very complete; some niche features |
For a full comparison, see LightBurn vs EZCAD.
Setting up LightBurn for a galvo laser
- Install LightBurn and start the trial or enter your license.
- Install drivers for your board if needed. LightBurn's documentation explains which driver to use.
- Add a device in the Devices window and choose the galvo/JCZ option. LightBurn may detect the board automatically.
- Set the lens size (field) to match your lens, for example 110 x 110 mm.
- Import your machine's settings from EZCAD's configuration file (often a markcfg file). This brings over the lens correction and calibration so your marks are the right size and shape.
- Test with a known shape, such as a 50 mm square, and measure it with calipers.
If marks come out the wrong size or distorted, the lens correction settings need adjusting.
Key settings on a galvo in LightBurn
Each layer in LightBurn has its own settings, similar to EZCAD's pens:
- Speed (mm/s), power (%), frequency (kHz)
- Pulse width for MOPA sources
- Passes
- Fill (hatch) settings: line interval, angle, crosshatch, bidirectional fill
- Wobble for wider lines and cleaner deep engraving on some jobs
Start with values from our fiber laser settings chart and see hatch settings explained for fill options.
Framing and focus
LightBurn uses the galvo's red light to frame the design or its bounding box. Focus first, then frame and position the part. See how to focus a fiber laser.
Rotary on a galvo
LightBurn supports rotary marking on galvo lasers with a connected rotary axis. Enter the diameter and enable rotary mode; LightBurn splits the design into narrow strips as the item rotates. See the rotary attachment guide.
Material library
Build a material library with settings for each material, lens and power. This is one of LightBurn's biggest advantages: you pick "stainless white 30W 110 mm" from a list instead of remembering numbers.
When EZCAD is still useful
- Your board isn't supported by LightBurn
- Specialized features like some 3D or industrial functions
- Quick troubleshooting: sellers often provide support in EZCAD terms
Many owners keep both installed. See the EZCAD beginner's guide.
Common problems
| Problem | Likely cause | Fix |
|---|---|---|
| LightBurn doesn't detect the laser | Driver or board issue | Install the correct driver, check USB |
| Marks are the wrong size | Lens correction not imported | Import markcfg from EZCAD or recalibrate |
| Design marks mirrored | Axis or correction setting | Adjust device settings |
| Red light preview offset | Red light offset not set | Calibrate the red light offset |
Safety
Software doesn't change laser safety. Wear 1064 nm glasses rated for your fiber laser and use extraction.
Frequently asked questions
Does LightBurn work with galvo fiber lasers?
Yes, with many lasers using JCZ (EZCAD2-compatible) control boards. Check compatibility and use the free trial before buying.
Do I need a separate license for LightBurn galvo?
Galvo support comes with specific license tiers. Check LightBurn's website for current licensing.
Is LightBurn better than EZCAD?
For most users, it's easier to use, has better design tools and runs on macOS. EZCAD is free with the machine and covers some niche features.
How do I import EZCAD settings into LightBurn?
Import the machine's EZCAD configuration file (often markcfg) in LightBurn's device settings to bring over the lens correction.
Can LightBurn do rotary engraving on a fiber laser?
Yes. With a connected rotary axis, LightBurn supports rotary marking on galvo lasers.